- 3 years ago
Knowing how to get your bike ready for summer is actually a rather simple thing to do. Sam Gupta has listed each part of the bike that needs attention when getting your road bike ready for summer and what you should be looking for when considering if parts need changing. When you boil it down, you want to get rid of any sign that it was used in winter, and replace any parts that may be corroded or simply past their best. Sam also gives tips on how to make improvements to your bike so that it is refined for summer riding. Dry roads and warmer temperatures mean that you can start to opt for components that don't need to be as weather resistant and durable in favour of speed and efficiency.
Category
🥇
SportsTranscript
00:00 The clocks have changed, the days are getting longer,
00:03 and the roads are drying out, and the weather is warming up.
00:07 You've done your winter miles,
00:08 and now it's time for those summer smiles.
00:11 In the same way that you don't have to go out
00:13 dressed like the Michelin man anymore,
00:15 there are some key changes that you can make to your bike
00:18 to get the most out of your summer riding.
00:20 I'm going to run you through everything that you need to do
00:22 to make sure that your bike is in tip-top condition,
00:25 and of course, 100% safe
00:28 after all those months of muck and grime.
00:31 I'll also show you how to make sure
00:32 that you're getting the maximum speed and efficiency
00:35 out of your machine.
00:36 Everybody knows that clean bikes go faster,
00:43 and crucially, they're easier to inspect.
00:46 So your very first job should be to get rid
00:49 of all of that salt and winter crust.
00:52 You probably have your own bike cleaning routine,
00:54 but if you are a bit of a soap dodger, then don't worry.
00:58 It is very, very easy.
01:00 While recommended, you don't need a jet wash
01:03 or specific bike cleaning products.
01:05 A bucket of hot water and some ordinary household
01:08 washing up liquid will do just fine.
01:10 Just make sure you start at the top of the bike
01:12 where it's hopefully cleaner,
01:14 and then you finish with the drivetrain
01:15 where most of the crud is.
01:17 When you do reach the drivetrain,
01:19 make sure you use some degreaser on the chain and cassette,
01:22 because being super thorough here really pays off.
01:26 But do be sure to make sure you rinse it thoroughly as well,
01:28 especially where you have used that degreaser.
01:31 A new bucket of clean water will be ideal.
01:34 And also, make sure you spend a little bit of time
01:36 just letting it air dry,
01:38 and then run it over with a dry cloth.
01:40 Once you've done that, that's the time to re-lube.
01:43 All of the abrasive grit and grime
01:49 that comes from winter roads is really hard on brake pads
01:52 and braking surfaces,
01:54 and it wears them down so much faster
01:56 compared to when you're riding in dry conditions.
02:00 If you're on rim brakes,
02:01 it's really easy to check the wear of your brake pads.
02:04 Some have a wear indicator line, but if they don't,
02:07 then just check whether your pads
02:08 still have their vertical grooves.
02:10 If they're worn flat,
02:11 then they're nearing the end of their life,
02:13 and it's probably time to replace them.
02:16 If the grooves are still there,
02:17 then run a small flathead screwdriver up and down them
02:19 to scrape out any of the debris and any little sharp bits.
02:23 It's also not uncommon for rim brakes
02:26 to pick up little bits of metal from the rim and the road,
02:29 and obviously, that can cause an accelerated amount of wear
02:33 on the rims themselves.
02:35 For disc brakes, clean your rotors with isopropyl alcohol,
02:38 and shine a torch on your calipers
02:40 to get a better look at pad wear.
02:42 If you've got less than a millimeter left,
02:45 then it's time to change them.
02:47 If you're using Shimano rotors
02:48 and they're less than 1 1/2 millimeters thick,
02:51 then change them too.
02:52 You might need a set of vernier calipers
02:54 just to get a precise measurement.
02:56 Alternatively, if the thickness of the rotor here
02:59 feels thinner than it does here,
03:01 that's also a really good indication
03:03 that it's on its last legs.
03:05 Also, be sure to pay attention to the lever feel.
03:08 If you're on disc brakes,
03:09 is there too much travel in the lever before they bite?
03:13 Do they feel squishy?
03:15 They might need bleeding.
03:17 It's not always a tricky job to do,
03:19 but if you're unsure,
03:21 then just go visit your local bike shop.
03:23 Rim brake users, if your levers are feeling sticky, rough,
03:26 or the calipers don't spring open again
03:28 when you release the lever,
03:29 you're probably looking at a new set of cables
03:32 to restore full smoothness.
03:34 If that doesn't work,
03:35 then the calipers themselves may need a full disassembly,
03:38 clean, re-grease, and rebuild.
03:41 If you're going to be using the same wheels
03:46 for both summer and winter riding,
03:48 be sure to give them a really proper inspection
03:51 when you're checking out the brakes.
03:53 If you are on rim brakes,
03:55 then check out the braking surface.
03:57 You don't want it to feel too concave
03:59 when you run your finger over it.
04:01 If it's excessively worn,
04:03 then you should seriously consider replacing the rims.
04:06 Worn out rims, exploding under braking,
04:09 is not something that anyone should experience.
04:12 Happily though, that's not a problem with disc brakes.
04:15 Check there's no play in the hub bearings
04:17 by grabbing the wheel when it's in the dropouts
04:19 and try and move it from side to side.
04:22 If there is play,
04:23 the sealed cartridge bearings have to be replaced.
04:25 But if you have cup and cone style bearings,
04:28 then they can be adjusted with some cone spanners.
04:31 Onto tires, make sure that there's no serious cuts
04:34 or embedded flints in the rubber.
04:36 You can pick up a lot of those during winter.
04:39 Ideally though, how about swapping to some lighter,
04:42 faster summer rubber?
04:44 Lower rolling resistance and a lower rotating weight
04:48 is a really easy way to go faster
04:50 for the same amount of effort
04:51 and it improves ride feel no end.
04:54 Replacing the harshness of winter rubber
04:56 with summer plushness is such a joy.
04:59 And if you're lucky enough to have a set of summer wheels
05:02 or racing wheels, ideally with deep section carbon rims,
05:06 then happy days, you're gonna go even faster.
05:08 On the subject of bearings,
05:14 unbolt your stem, drop out your fork
05:16 and have a really good look
05:18 at the condition of your headset bearings.
05:20 It's always worth cleaning and re-greasing them.
05:23 If they look and feel like they've seen better days,
05:26 then just replace them.
05:28 Check your bottom bracket bearings too.
05:31 If there's play or the crank simply won't spin freely
05:34 when the chain's off
05:35 or it's making the dreaded creaking noise
05:37 when you're riding,
05:39 the assembly will need some attention.
05:41 Obviously, it depends what type of bottom bracket
05:43 you're using, so we won't go into disassembly details here.
05:47 But no one wants to be riding with a creaky bottom bracket
05:50 and no one's gonna want to ride with you either.
05:53 The seat post and saddle are another potential source
05:59 of really nasty noises,
06:01 especially if you're not a mudguard user.
06:04 They will have sat in the direct line
06:06 of rear wheel spray all winter.
06:09 So undo the seat post clamp bolt
06:11 and remove the post from the frame.
06:13 Now, this is a really good chance to check
06:15 that the seat post itself
06:16 hasn't become seized within the frame
06:18 and that it comes out with relative ease.
06:21 Give the seat post and the inside of the frame
06:23 a really good wipe down with a clean rag
06:27 and then apply some fresh grease or carbon paste
06:30 if you've got any carbon components in your setup.
06:33 Saddle rails themselves can also corrode
06:35 and pick up so much grit and start creaking.
06:38 So it's really worth taking the saddle out,
06:40 giving the rails a really good clean,
06:43 putting a dab of grease on them and then refitting it.
06:45 The drive train is the part of the bike
06:51 that will have borne the full brunt of winter riding
06:54 as it's completely exposed to the elements.
06:57 Of all the parts of the bike that you've checked so far,
06:59 the chain is the thing that's most likely to need replacing.
07:03 So you can use a chain checker to see how it's worn
07:06 and therefore how much it's stretched.
07:09 Generally, when it gets to 0.5% of elongation,
07:12 you should change it.
07:14 Let it get too far and you will need to replace
07:16 your cassette and chain rings
07:18 and that is a whole lot more expensive.
07:21 The teeth on your chain rings shouldn't be too pointed
07:23 or shark fin shaped.
07:25 But what about changing the ratios to be more in tune
07:28 with the riding you'll be doing in summer
07:29 compared to what you've been doing all winter?
07:32 For example, if you're heading to the Alps,
07:33 you might want a wider ratio cassette
07:36 than you've been using for your winter local lanes riding.
07:40 That way you're spreading the wear
07:42 as well as fine tuning your equipment.
07:44 (upbeat music)
07:46 Last but by no means least, change your bar tape.
07:51 If it's ratty, just rip it off.
07:53 New bar tape can give a bike a huge lift.
07:56 It's well known that pro mechanics change the bar tape
07:59 for their riders all the time
08:00 and it gives them a psychological boost,
08:02 safe in the knowledge that their bike
08:04 is in pristine condition.
08:06 It is of course the first thing that you see
08:08 when you look down.
08:09 (upbeat music)
08:12 Before you sprint off into the sunset
08:15 on your fresh summery steed,
08:17 have one last thing about the effect
08:19 that your winter riding has had on you as a rider.
08:23 Have you become a more efficient peddler?
08:25 Perhaps you've lost a little bit of weight around the waist.
08:29 Bike fitters will often suggest to a rider
08:31 who's not quite race fit
08:33 that they should put an extra spacer under their stem
08:36 while that extra timber is there and getting in the way.
08:39 But have those winter miles actually turned you
08:42 into a lean, mean racing machine?
08:44 If that's the case, then throw away that spacer,
08:47 slam your stem and enjoy a summer of fast aero riding.
08:51 Have you got your own routine
08:54 for getting your bike summer ready?
08:55 If you think we've forgotten anything,
08:57 then drop it down in the comments below.
08:59 If you enjoyed the video, then please do drop it a like,
09:01 subscribe to the channel for more content
09:03 and I will see you again very soon.
09:05 (whooshing)
09:07 (whooshing)