00:00In this Bamboo Studio tutorial you learn how to enforce manual supports.
00:06When a model is loaded in Bamboo Studio, click on the Global tab.
00:11Then select the Support tab. Check the Enable Support box.
00:19Then change the type to Tree Manual.
00:26Click on the Preview tab.
00:30And you see there's no support because no manual support has been created yet.
00:39Click on the Prepare tab to return.
00:42Right-click on the model and select Add Support Enforcer.
00:47And select a cylinder.
00:53It will be selected automatically. Now click on the Scale button.
01:00Uncheck the Uniform Scale box.
01:04And enter a size of 50 mm in the Z direction.
01:10Now the cylinder will reach far enough into the cat's head.
01:13Click on the Move button to change the position of the cylinder.
01:18For X, enter a position of 125 mm, which fits this example.
01:24For Y, enter 90 mm, which is on the center of the build plate.
01:30For Z, click on the Align Bottom button to place the bottom on the build plate.
01:38Click on the Move button again to exit this menu.
01:44Then click on the Preview tab.
01:47Now the cat's head should be supported with trees.
01:52Let's preview the layers.
01:55And you see only the head is supported.
02:01The support can also be changed to Normal Support.
02:05To do this, click on the Global tab.
02:08In the Support tab, change the type to Normal Manual.
02:14Then click on Prepare and the Preview tab.
02:18And the tree support has been replaced with Normal Support.
02:26Return to the Prepare tab.
02:29And click on the Objects tab and select the cylinder.
02:33You can right-click it and then delete it.
02:37But you can also select the cylinder directly on the build plate and press Delete to remove it.
02:43So, with Support Enforcers, it's possible to add targeted support to your 3D model.
02:48Please subscribe if you like it. Thanks.
02:51You might also want to check out my 3D design channel. See you there.
02:56And if you like music, you might also want to check out this channel.
Comments