00:00Hashtag Top 5 Stainless Sanitary Clamps for Homebrew Kettles
00:04Ok, real talk, if you brew at home, the weakest link in your whole setup is almost never the
00:09kettle itself. It's the clamps. The fittings, the gaskets, the slow drip you find 3 hours into a
00:16boil. So I went digging for the best deals on the Top 5 Stainless Sanitary Clamps for Homebrew
00:21Kettles, and honestly, these are the ones I'd actually put on my own rig. Let's get into it.
00:28Starting at number 1, this is the Workhorse. It's a stainless sanitary hose barb tri-clamp
00:34fitting, and the size range is ridiculous, hose barbs from 6mm all the way up to 38,
00:39plus clamp sizes from half an inch to 2 inches. And you can get 304 or 316L stainless,
00:46which actually matters if you're working with anything acidic. Best part? Under 4 bucks.
00:53For something with almost 5,000 units sold and a 4.9 rating, that's the best value on this list.
00:59If you're barb ING a kettle to a cooler or a pump, grab it.
01:04Number 2 is a bit different, and it's the one a lot of you have been asking about.
01:08This is a tri-clamp sanitary pressure clamp collar, 304 stainless, covering 1.5, 2, and 2.5-inch,
01:16and it's built for people making their own custom accessories, hence the chuck accessories in the
01:20name. Around $5, nearly 5,000 sold, 4.8 stars. Think of it as the band that holds your rig
01:28together
01:29when you don't want to buy a pre-made piece. Number 3 is from YQBS, and it has the only
01:34perfect 5-star rating I found, so pay attention. It's a sanitary weld fitting with a tri-clamp type
01:41ferrule flange, SUS304 stainless, designed to be permanently welded onto your kettle or hard pipe.
01:47The welded ferrule gives you that flat, flush, factory look instead of a hose barb jutting out
01:52at an angle. 370. If you own a welder, this is the cleanest way to make a spot-welded kettle
01:59look like it came out of a brewery. Number 4 is the easiest route to a finished-looking setup with
02:05zero welding. This pipe clamp comes with the ferrule included, 304 stainless, fitting 50
02:10.5 mm in 64 mm, which lines right up with 1.5 inch and 2 inch. So you clamp it
02:17straight onto an
02:18existing port and you're done. It's the priciest one here at $685, but you're getting the clamp and
02:24the ferrule together. For a first homebrew rig, that's money well spent, and it's sitting on a
02:294.9 from over 3,000 buyers. Alright, that's my 5. Every one of these links is sitting in the
02:37description, so go grab whichever one fits your rig. If this saved you some money, smash a like,
02:42and subscribe, I'll keep hunting down the best homebrew deals.
