00:00Okay, so my washing machine started doing this thing where it sounds like it's trying to escape
00:04the laundry room during the spin cycle and I went down a bit of a rabbit hole trying to fix
00:08it.
00:09Turns out it's almost always the support rods and I found five of the best deals for the top
00:13five washing machine support rods for quiet spins. Let me walk you through them so you don't
00:18waste money on the wrong ones like I almost did. First up, the DC66-00531 C-Shock Absorber Rod
00:26and honestly, this is the one I'd grab first. It's an 80N buffer, which means it's got a bit
00:32more push behind it, so it handles a heavier, more off-balance load without that violent thumping.
00:38Over 4,800 people have bought one, it's sitting at a 4.9 rating, and it's only 595.
00:44For that price, you can do the whole machine and still have change for a coffee.
00:49Next is the Samsung DC66-00660A, a 60N balance damping rod, and this one's the
00:56direct fit option if you've got a Samsung drum machine. The nice thing here is you're not
01:01guessing on compatibility, the part number matches, so it just drops in where the old one came out.
01:07It's 982, which is still cheaper than most replacements I looked at, and it's got nearly
01:114,000 sales at a 4.7. Solid, no drama choice. Third one's the 0020808145G, also 60N, and this is
01:22the one I'd point at if your machine's on the older side or you're not totally sure what you're
01:26working with. It's a more general fit support rod, so it covers a wider range of drums, and at 1620
01:32it
01:33is the priciest of the bunch, but it's backed by a 4.9 rating in over 3,600 buyers, so
01:38people clearly
01:39aren't regretting it. Think of it as paying a little extra for peace of mind. Now, if you want to
01:45just do
01:46the job properly in one go, the premium set of four heavy-duty carbon steel dampers is the smart buy.
01:52For rods, one box, all matched, which matters, because you really should replace them as a set
01:57instead of playing whack-a-mole with one bad rod at a time. And here's the slightly ridiculous part,
02:03the whole set is 513. Cheaper than some single rods I found. 2900 sales, 4.8 rating. That's the value
02:13pick right there. Last one is this vibration damping rod kit, for shock absorbers for top
02:18loaders, geared toward DIY folks who want to stabilize the balance and stop the machine walking
02:22across the floor. 461 for all four, which is about the least you can spend to fix this problem, and
02:29it's rated 4.9. If you've got a top loader that's wobbling and you just want to handle it yourself
02:35on
02:35a Saturday afternoon, this is the one I'd start with. So that's the list. Links to every single one are
02:42down in the description, so check the specs against your machine before you order.
02:46If this saved you a service call, drop a like, hit subscribe, and I'll keep hunting down the
02:51cheap fixes that actually work. Cheers!
