Skip to playerSkip to main content
  • 13 minutes ago
back

Category

📺
TV
Transcript
00:01If you get money into your home, you get money back, which is why DIY Network created Sweat Equity, a
00:08brand new show revealing the secrets of how a little money and a little sweat will increase the equity of
00:13your home. Watch Sweat Equity today at 4.30 p.m. on DIY Network.
00:574.30 p.m.
01:005.30 p.m.
01:06Hey, Richard.
01:07Hey, good morning.
01:07Morning, Tommy.
01:08Hey, Kevin.
01:09So, what are you guys working on here?
01:11You're not building a doghouse, are you?
01:13No, but today I'm visiting you with a homeowner to show her how to hang her gutters and downspouts.
01:18And this woman may get the award for the creative use of duct tape.
01:22I think you're right.
01:23All right, well, this I've got to see.
01:24I'll check with you guys later.
01:26Well, good morning.
01:27I'm Kevin O'Connor, and welcome back to Ask This Old House.
01:30What kid didn't get a flat tire on a bike when they were young?
01:33When I got one, my dad showed me how to fix it.
01:36But what do you do when your wheelbarrow gets a flat tire?
01:39Well, for that, we've got Roger Cook.
01:41Hey, Roger.
01:42This isn't a flat, Kevin.
01:43This is a major malfunction.
01:45Yeah, that's a problem.
01:47Unfixable.
01:47Let me show you what we would do.
01:49Okay.
01:49All right.
01:50If you get a flat in a tire, you've got a couple different ways to attack.
01:54First of all, we'd identify what type of tire it is.
01:58This is a tube tire.
02:00This is not sealed to the rim.
02:02Okay.
02:02So that tells me there's a tube on the inside.
02:04So you've got an inner tube on the inside that holds the air.
02:07That's right.
02:08And when this gets a hole, simply just scratch it up, put some glue on, and a patch.
02:11Just like your bike kit you did years ago, and then get it back inside, blow it up, you're good
02:15to go.
02:16I remember it well.
02:16What are you going to show us?
02:17Well, here we have a tubeless tire.
02:20Okay?
02:20And you can tell because the air valve is fixed tight to the rim.
02:25So instead of an inner tube, the actual tire is sealed in the air.
02:28That's right.
02:29All right.
02:29Now, this is a flat tire.
02:31Sure is.
02:31In order to find the hole, the first thing we're going to do is fill it with air.
02:34If you give me the air supply.
02:35Here's a compressor.
02:37Fill that up.
02:39So by filling it, we should be able to hear the air coming out of this tire and then find
02:43that hole.
02:44Either hear it or feel it.
02:44One or the other.
02:45Oh, I can hear it already, yeah.
02:47There you go.
02:48Yep, there it is.
02:50Okay?
02:50All right.
02:50So now that we've got the hole, how do we fix it?
02:53Well, we're going to use a plug repair kit, and it helps having the tire inflated.
02:58That's the only way you can do this.
03:00So the first part of the kit is a reamer.
03:02You can see it has a real rough edge on it.
03:04Yeah.
03:04We're going to take that and put it down into the hole and rough up the edges.
03:10So that actually cleans it up a little bit.
03:12Right.
03:12You just hold that with me.
03:13I want to make sure that all the air, leave it in.
03:15I want all the air in the tire because that's going to help me with the rest of the repair.
03:19Here's the second part.
03:20This is the applicator.
03:21It has a little eye in the center.
03:23It actually has an opening with a couple of cutting edges on it.
03:26It actually looks like the eye of a needle.
03:27Right.
03:28We're going to take and put this plug in there.
03:30You feel that?
03:30It's all sticky and rubber.
03:32Oh, yeah.
03:32All right.
03:33So that's going to slide right into the hole.
03:37So you've literally got to thread the needle here.
03:39That's right.
03:40Once you get it started, you can usually grab it with the pliers, and it'll come through pretty easy for
03:45you.
03:48There you go.
03:49Yeah.
03:49What I want to do is get it about halfway through.
03:52Okay.
03:53Okay.
03:54Now, for added adhesion, I'm going to coat it with rubber cement.
03:59We don't take any chances.
04:03So this is our plug.
04:04That's right.
04:05Now, what's going to happen is when I tell you you're going to pull that out, I'm going to take
04:09this.
04:09Not yet.
04:10I'm going to slide it down in and pull it out.
04:12Okay.
04:12Okay.
04:13You ready?
04:13Yep.
04:14Go ahead.
04:15All right.
04:15So this goes in about two-thirds of the way down in, and then we just pull out.
04:20Oh.
04:21Okay.
04:21Now, with the plug in place, we're just going to take a pair of side cutters and cut it off.
04:28No more hole.
04:29No more flat.
04:30Nice fix.
04:31Ready to go back to work.
04:32Don't go away.
04:34Coming up, Tommy makes a house call.
04:37Here's a DIY kit on training vines.
04:40Brought to you by the Home Depot.
04:42There are many varieties of vines that provide excellent shade and year-round color.
04:46The best time to plant vines is in the spring.
04:49Begin by preparing the soil as recommended by the instructions, and remove any stakes and
04:54ties that are attached to your vine.
04:56Now, plant the vine at the base of your arbor and first train it to grow horizontally.
05:01As the vine grows along the bottom, shoots will work their way up the arbor.
05:05If there's a gap between the ground and the arbor, stretch a string horizontally between
05:09the two poles or add lattice for the vine to grow on.
05:12For established vines, trim away any dead leaves or long offshoots, and tie the stems loosely
05:19to the base so the vine has room to grow and expand.
05:22Climbing vines are easy to maintain, but be sure to prune regularly to prevent runaway
05:27growth.
05:28This DIY kit is brought to you by the Home Depot.
05:31For step-by-step instructions, visit DIYnetwork.com.
05:36I'm Sue, and I live here in this apartment building, and this is our garden.
05:41When I first got here, this was full of weeds and absolutely no color.
05:46My guys at Home Depot helped me with everything from condition of the soil to what grows best
05:52and what light.
05:53The garden, it makes friendships.
05:55It's brought a sense of community to the building that we're sharing.
05:59Go plant something and watch it grow.
06:01If you grow good things in your garden and in your life, then you're surrounded by beauty.
06:09Craft real mayo in the Big Mouth Jar.
06:12Makes it easy to get the taste you love.
06:15Lynn's Better Have BLT.
06:20Craft your sandwich.
06:22I'll stop the world and melt with you.
06:30You've seen the difference, and it's getting better all the time.
06:37Inspiration pulled from your life.
06:39That's professional grade.
06:43With refined styling and overhead sky views unlike any other, it's defining the category.
06:49Welcome to Acadia, the crossover from GMC.
06:51Brought to you by Acadia.
06:53Welcome to Acadia, the crossover from GMC.
06:58We've had situations with the gutters forever in this house.
07:02And you know the weather we've had this past spring.
07:05It's been raining.
07:05Pouring, pouring rain.
07:07I came home one day to find this gutter hanging way over this direction, right toward my neighbor's really nice
07:15car.
07:15So, how'd you use the duct tape?
07:19Well, you know, I had to do some pretty fast thinking.
07:23It was pouring.
07:23I just went out my second floor window.
07:25I walked over here.
07:26I grabbed the first thing I could find, and I just made it work.
07:30So, let me get this straight.
07:31It was pouring rain out.
07:32You did some fast thinking.
07:34You climbed up out of the window onto the wet roof.
07:37You reached over, and you pulled your downspout out, and you duct taped it to the wall.
07:42That's exactly what I did.
07:43That was fast thinking, Karen.
07:44That was fast.
07:46Well, you know what I think I want to do?
07:48Let's get a ladder.
07:49We'll take a look and see what's going on up there.
07:51Sounds good.
07:54Okay.
07:57You're pretty good on a ladder, Karen.
07:59It sure beats crawling out on the roof in the rain.
08:02I bet.
08:03Well, I can see why this downspout failed.
08:06There's actually only one strap at the bottom of the downspout.
08:09When I like to see another strap here at the top, and also I look up here, and I see
08:15that
08:15the downspout is not connected to the gooseneck inside the gutter.
08:19So, we should put a fastener in there, too, so we'll solve that problem so it won't fall again.
08:24Now, I notice that you have an offset sitting on the roof right here.
08:27This must go into the bottom of the downspout into this gutter here.
08:32It's supposed to, but I couldn't get it to fit.
08:34Well, we can fix that.
08:35Well, I bet you had a water problem down below with that water running out of that downspout.
08:39I do.
08:39You can actually see it on the wall and the paint and into my basement.
08:42Oh, well, we'll definitely get that attached.
08:44The other thing I wanted to show you over here, Tom, is if you look, you can see that this
08:48is sagging, the gutter's sagging right in the middle.
08:50Oh, yeah.
08:51Well, these brackets that actually hold the front of the gutter up have actually failed.
08:56And this is now the low point of your gutter.
08:59A lot of water, snow, and rain must collect right here, and that's not good.
09:03So, what we want to do is we want to rehang this gutter, making the center of the gutter
09:07the high point.
09:08Oh, so that everything will disperse off to the sides.
09:11Exactly.
09:11Now, to get started, we're simply going to remove these brackets.
09:19All right, Karen, you want to give me a hand here for a second?
09:21Sure.
09:21All I want you to do is hold this gutter against the fascia board so I can use a screw
09:26to temporarily
09:27hold it.
09:34Okay, now I can remove the rest of the brackets.
09:39Okay, now with all the brackets off this side and the gutter free, I'm simply going to pull
09:45the gutter down about three-quarters of an inch lower than it was and put a temporary
09:50screw in the back.
09:51That will really give it a lot of pitch.
09:57Now, with our gutter tacked in place and properly pitched, we're ready to install our hangers.
10:03Now, the first thing I needed to do is mark the fascia board where the structure was behind
10:08these nails.
10:09There's a rafter.
10:10And that's where we want to place the new brackets.
10:13You want to do that for me?
10:14Sure.
10:15All right, now we're actually using a different bracket than what you had originally.
10:18This is a pretty lightweight, flimsy bracket.
10:21We're going to use something better, stronger, with a better screw.
10:25So you slide it on the front of the gutter.
10:27There's a little lip there.
10:29Catch it on the gutter.
10:30Line it up with the nail in the back and push back.
10:42All right, Karen, I'm going to need your help here.
10:44Okay.
10:44I'm going to hold the face of the gutter in and you screw it right in.
10:48Let me hold the bracket up tight to the back.
10:50Can you get in there?
10:51Yeah, I think I'm going to.
10:52Just push hard.
10:57Beautiful.
11:05Okay, now we can fix that downspout.
11:08All right, we've removed the strap at the bottom and now I'm going to remove the duct tape so I
11:12can pass the downspout over to you and we can work on it safely on the roof.
11:20There you go.
11:21And I'm going to use these little pan head screws that are white that are specially designed for gutters and
11:27downspouts.
11:38Now I'll attach the lower strap.
11:53Okay, now we're ready to put the top strap on.
11:56Got a screw ready?
11:58Put it right in the middle of that strap.
12:02Good.
12:04Okay, let's put it on the house.
12:07Okay, now I want the gutter outlet above to go into the elbow at the top of the downspout.
12:14Then I want to pick up the offset below, put that into the gutter below.
12:21Put the pipe into position and screw it in place.
12:28Okay, and the last screw into the top elbow into the gutter outlet.
12:33And what do you think, Karen?
12:35Oh, this is fantastic, Tom.
12:37As you would say, beautiful.
12:39You're a funny lady.
12:41Look, stay off the roof in the rain.
12:43All right, that's all I ask and no more duct tape.
12:45You got it, Tom.
12:46Thanks a million.
12:51Bob Biela.
12:56Bob Biela's home again, coming up next on DIY Network.
13:00Well, the battery's good, so I figure it's the alternator.
13:04So I go down to AutoZone and the guy says, let's test it first.
13:07Might not be a problem.
13:09Turns out it's just a bad cable.
13:11You know, with AutoZone, piece of cake.
13:16From generation to generation, nothing runs like a deer.
13:16No regrets?
13:20No regrets?
13:22It's been good to me.
13:24Take care of it, and it'll be good to you.
13:27Yeah, I hear you, Dad.
13:33Like we said, that was yours.
13:38From generation to generation, nothing runs like a deer.
13:45It's time to blaze from stuff again.
13:47With more cash and prizes.
13:49Joining our good friends.
13:51Your house.
13:52With lots of cool new stuff.
13:54Your house.
13:55With $10,000 every month.
13:57Make your house a Maxwell house.
14:00Hey, honey.
14:01Hey.
14:05Is the refrigerator okay?
14:07The fridge is fine.
14:08Oh, okay.
14:10The dryer.
14:11How's the dryer?
14:12Yeah, it's all good.
14:14So, the Maytag repairman?
14:16Fixing the cable.
14:17Nice.
14:19Oh, can you also take a look at the garage door?
14:21The Maytag Ice 2-0.
14:22Ice and water through the door and strong box hinges.
14:25Now that's a Maytag.
14:26Tell me about it.
14:29At California Closets, we create custom design solutions for every room in your home.
14:36California Closets.
14:38Home and life simplified.
14:40Call 800-2-SIMPLIFY or visit calclosets.com.
14:46Lip injections not for you?
14:48Try new Olay Regenerist Line-Fighting Lip Treatment.
14:52It diminishes the appearance of vertical lines on your lips.
14:55No big operation.
14:57New Regenerist Lip.
14:59My family's counting on me.
15:01Do we rebuild?
15:02How can we go on?
15:03I'm so tired.
15:04Is it even worth it?
15:05I'm not sure I can be strong.
15:07How do I find a job?
15:09I need someone to get up with all of me.
15:11Should we keep strong for your child care?
15:13Everything is good.
15:16Mommy.
15:17Mommy.
15:20Mommy.
15:29Can you really get a $150,000 mortgage for $450 a month?
15:34Yes.
15:35With the new Secure Advantage loan.
15:37Exclusively from Quicken Loans.
15:39Nothing cuts your payment like Secure Advantage.
15:42In fact, Secure Advantage could cut your payment by over 50%.
15:46Call now.
15:47Quicken Loans makes it fast and easy.
15:49If a $150,000 mortgage for $450 a month sounds good to you, call now.
15:55While rates are low.
15:56Quicken Loans.
15:57America's home loan experts.
16:07Well, we heard from these people that they have a valve on their water heater that has
16:11been replaced three times, and it's still leaking.
16:14Maybe it's time to dig in a little bit deeper.
16:23Hello.
16:24Hi.
16:24What's your turn?
16:24We asked.
16:25This is what else?
16:25Hi, I'm Ann.
16:25Nice to meet you.
16:26How are you?
16:26I'm doing well.
16:27And who's this?
16:28This is Will.
16:29Hey, Will.
16:29How are you?
16:30Can you give me five?
16:31How old is he?
16:32He is two.
16:33All right.
16:34Handsome boy.
16:35Richard, I'm Dan.
16:36Nice to meet you.
16:36Nice to meet you.
16:37Now, we got your email.
16:38How long have you had this issue with the water heater?
16:40We've had it about two years, which is about how long we've been here.
16:44Maybe it's time to get it fixed, huh?
16:45Yeah.
16:46So what's been happening?
16:47Well, let me show you.
16:48It started off, there was a jar near the hot water heater that we had to empty, you know,
16:52once a week.
16:53Yeah.
16:53And it got to the point where we switched over to a bucket, which we had empty three times
16:57a day.
16:57Three times a day?
16:58Yeah.
16:58It came just in time.
17:01There it is, right over here.
17:04Okay.
17:04There is your water heater.
17:06Oh, and there's your friend, the bucket.
17:08Yeah.
17:08It's better in the bucket than on the floor.
17:10That's for sure.
17:11All right.
17:12Well, your cold water comes in right here to the water heater and comes down through a
17:16dip tube that sends cold water all the way to the bottom right here.
17:20Now, there's a burner.
17:21In your case, it's an oil-fired burner to heat up the water.
17:25When the water gets heated, it's going to come up through this tapping right here and go
17:30out to the hot water faucets.
17:31And I'm glad you have a little insulation on there for energy efficiency.
17:34That's good.
17:35Now, but the valve that's leaking is right here.
17:37This is called a TNP valve.
17:39The T stands for temperature.
17:41If this water ever approached steam, which is about 210 degrees, it would open.
17:45The P stands for pressure.
17:47If this water ever got to be at 150 pounds pressure, it would also open.
17:51In either case, whenever it did open, it's really important to have this overflow.
17:55So if it opened, it would come down through this pipe and go down near the floor so it
17:59wouldn't open against people.
18:01So this is the most important safety device on this whole system, though, because if you
18:05don't have a place for this to relieve, this thing could explode and it'd be unsafe for
18:08your family.
18:09All right?
18:09All right.
18:10Now, these valves can be defective.
18:12Yep.
18:12That's actually the third one, so.
18:14Not three of them.
18:15Right.
18:15So if you've replaced three of them, it makes me suspect that it's doing its job.
18:20Exactly.
18:20That we're building up 150 pounds pressure somehow.
18:23Now, people don't realize that water expands when it gets heated.
18:27Okay.
18:27So now, if we heat this water, you would think it might go out here and expand into the hot
18:34water line, but it can't.
18:35Why is that?
18:36Well, normally, the hot water valves and faucets upstairs are all shut off.
18:39So it actually goes backwards through the cold water feed.
18:43So this water that's expanding pushes its way backwards, pushes, pushes, pushes.
18:47Now it's pushing this way.
18:50And normally, it goes right back through the meter and right out into the city water supply
18:55and expands this way.
18:56Okay.
18:57But you have a valve that makes it impossible for it to do that.
19:00Right here.
19:00This is a pressure-reducing valve.
19:02The city might offer you 100 or 125 pounds pressure.
19:06This valve is designed to step that down to a more manageable pressure, 40, 50, 60 pounds.
19:12Well, it's a one-way valve.
19:13It won't let water expand this way.
19:16If we don't let the water expand this way, what happens?
19:19It wants to expand.
19:20It has no place to go.
19:21It shows up right here.
19:23C-P valve.
19:23Right.
19:24So we have to find you a place for the water to expand.
19:26And I have just the thing in the truck.
19:28Great.
19:29Stay tuned for more expert advice.
19:33Next on DIY, watch as a 19th century brownstone gets new hardwood floors on Bob Vila's Home
19:39Again.
19:40Then, Amy Matthews shows you tips for laying slate, tile, and a shower on Bathroom Renovations.
19:47Here are the DIY basics on waxing your vehicle, brought to you by Advance Auto Parts.
19:53Today's clear coat finishes resist oxidation and the harmful effects of acid rain.
19:58But you should still wax your car three or four times a year.
20:01Before waxing, you'll want to start with a perfectly clean and dry vehicle to prevent scratches and streaks.
20:07A good wax job starts with a quality wax.
20:10Some new formulas can even be applied in direct sunlight rather than shade.
20:14Today, wax should be applied with a circular motion, doing small sections at a time.
20:19A thin layer works best, so don't lay it on too thick.
20:22When finished, the wax will haze, and you can buff it to a high gloss with a microfiber towel.
20:27Try to rotate the cloth as you work, shaking out the residue.
20:31For a deeper shine and extra protection, use multiple layers of wax.
20:35You'll know it's time for a fresh coat when water no longer beads up.
20:39This DIY basic is brought to you by Advance Auto Parts.
20:42We're ready in advance.
20:44For more on waxing your vehicle, check out diynetwork.com.
20:52Sometimes, all I need is the air that I breathe.
20:57Yes, to love you.
21:01All I need is the air that I breathe.
21:04Sometimes, all you need is Advance Auto Parts.
21:07Now through June 30th, all air filters are 25% off.
21:11Save gas.
21:12Save money.
21:13Breathe easier.
21:14We're ready in advance.
21:18Bring the fresh air in while keeping bugs out with an ODL retractable screen door.
21:24It's there when you need it, out of sight when you don't.
21:27ODL screens are easy to install and come in a variety of styles to suit your lifestyle.
21:32Plus, our screens are made of durable fiberglass, making them practical and resistant to everyday wear and tear.
21:39It's a fresh approach to fresh air.
21:41The retractable screen by ODL.
21:44Building value into building products.
21:47Boom, take, take, take, he's got it.
21:49He's got it.
21:49Yes!
21:50Yes!
21:50Hey, let's have a pizza.
21:52Make it a thin crust.
21:53You got it.
21:55Hello?
21:56Yeah, we'd like a large thin crust pizza.
21:57Ralph?
21:58Exactly.
21:59And you know what?
21:59Make it the way I like it.
22:00Load it with mozzarella and toppings.
22:02You know I hate when you do this.
22:03Wonderful.
22:04And another thing.
22:04Make it snappy because we're starving, right boys?
22:07Ralph.
22:07Chop, chop.
22:08For fresh baked pizza today, it's not delivery, it's DiGiorno.
22:12Hey, great pizza, Ralph.
22:13We'll deliver.
22:14That'd be me.
22:48This has been an amazing month, and it just keeps getting better.
22:51Thanks to all my new friends at GMC, we're collecting more cards for the troops than we ever could have
22:56on our own.
22:58And now they want to say thanks to you.
23:01The GMC Memorial Day sales event has been extended through June 4th.
23:06Get 0% APR financing or $22.50 total cash back on the all-new Sierra.
23:11It's our way of saying thanks.
23:13See the pros at your local GMC dealers by June 4th.
23:19From generation to generation, nothing runs like a deer.
23:19No regrets?
23:23No regrets?
23:25It's been good to me.
23:27Take care of it, it'll be good to you.
23:30Yeah, I hear you, Dad.
23:36Like we said, that was yours.
23:42From generation to generation, nothing runs like a deer.
23:48Dan, just bring that box along, would you?
23:49Sure.
23:50All right.
23:51So, I have taken a pressure gauge and put it onto the drawer for the bottom of the tank here.
23:55Let's see what we've got for pressure inside that.
23:57Yikes, look at that.
23:59170 pounds.
24:00So, that means that relief valve is definitely doing its job dripping right there.
24:04We need a place for expansion.
24:06That's going to happen with this.
24:08This is a thermal expansion tank.
24:10Okay.
24:10Now, I brought along a cutaway to help understand it.
24:14Inside this tank, there are two chambers.
24:16There's an air chamber here and water's in this chamber.
24:20Between them, there's a bladder, a rubber bladder.
24:23Now, at the bottom, there's an air fitting right here.
24:26We'll take a bike pump and we'll charge this with the right pressure.
24:29On this side is going to be expanded water.
24:33Now, where does water want to go normally when it expands?
24:35Up the cold water supply.
24:36Absolutely.
24:37So, it wants to push this way.
24:38So, we're going to take a tank like this and connect it right into here to give it a place
24:43to expand.
24:52All right, Dan.
24:53Well, I've already soldered these connections.
24:55Now, this is where the expansion tank is going to tie into.
24:57And this is going to be secured up into the wood.
25:00But I didn't want to solder up against the wood with an open flange.
25:03Okay.
25:04So, grab your drill.
25:04Let's put a couple of screws in right about there.
25:10Go ahead.
25:11All right.
25:15You get that side.
25:20There's one, there's two.
25:22Good.
25:23And I'll put a couple in over here.
25:26Now, I need to cut a T in right here.
25:28So, there's the T.
25:30Hold it in place and make my mark.
25:33All right.
25:34Now, I've got to cut my T fitting.
25:43We're just going to clean up with emery cloth all of our ends.
25:53And we're ready to assemble it all and solder it up.
26:01Now, we just have to flux.
26:03A little bit on here.
26:05And just pull that fitting apart.
26:07Okay.
26:08Now, on both sides of there.
26:10And you'll notice I've added a service valve.
26:12That'll be good if anybody ever has to work on that expansion tank in the future.
26:17Okay.
26:17Okay.
26:17Before I solder, I just want to take that valve out of the way so we don't overheat the washer.
26:23And then we solder.
26:37You always have to wipe the joint at the end.
26:46Okay, Dan.
26:47We have to pressurize this tank before we put it up.
26:50And we're going to set it to 70 PSI.
26:52Which matches what the pressure-reducing valve is set at.
26:55You can be the pump person.
26:57All right.
26:57Start going.
27:00Go, baby.
27:04A couple more.
27:06Good.
27:12Hey, perfect.
27:13All right.
27:14The cap goes back on.
27:15Make sure it doesn't leak over time.
27:17And we're going to screw it into place.
27:23And we're ready to fill.
27:31Okay.
27:32Snug it up.
27:39All right, Dan.
27:39And we've got the cold water back onto the water heater.
27:42But I've left this valve off that goes to our expansion tank.
27:45Burner's firing.
27:46And look what's happened now with our pressure.
27:48It built up just as it did before, up to over 150, 160.
27:53And look.
27:53We have the same condition.
27:55Mm-hmm.
27:55Now it's time for us to introduce the expansion tank.
27:59And as I do, I'm going to open this valve.
28:03And now what happens is all that water has a place to expand.
28:09What happens to our pressure?
28:11Back down.
28:11Look at that.
28:12And now check the overflow.
28:14It's starting to slow down.
28:15It should stop.
28:16Dripping, stopping.
28:17Look at that.
28:19No more pressure problems.
28:21Great.
28:22Wow, Richard.
28:23I can't believe it.
28:24I've been planning weekends around emptying these buckets.
28:26You're going to find it no use for your pail.
28:28Exactly.
28:28Great.
28:29Thank you very much.
28:30Have fun.
28:32Well, water always expands when you heat it.
28:34So how come every hot water heater doesn't have one of these expansion tanks?
28:37Well, any water heater could benefit from having an expansion tank.
28:40But normally there's plenty of room for expansion in the water supply system.
28:44I never realized the water supply system acted as an expansion tank.
28:47Absolutely.
28:48And historically it worked perfectly.
28:50It's only when we introduced a couple of new type of valves, one-way valves, that we had issues.
28:54On this house we had a pressure-reducing valve.
28:57Full water supply right here.
28:59Pressure of probably 100 pounds.
29:00Step down to a lower pressure right here.
29:02It only allowed it to come in, not to go back out.
29:05More and more we're seeing a valve like this, which is a backflow preventer.
29:08It doesn't change the water pressure.
29:10It just only allows the water to go in the house, not back.
29:14And the issue with this is it wants to protect against any contaminated water from working its way back out
29:19into the water supply.
29:20I find that more and more municipalities are requiring these now.
29:24Absolutely.
29:25It's becoming a code issue.
29:26And in any case, whenever you see these, this is really going to be your only fix.
29:30Well, nice job, Richard.
29:31It was a good fix and you really helped out that homeowner.
29:33That's right.
29:33We took the pressure off.
29:36Well, keep your letters and your emails coming because we would love to hear from you.
29:40And until next time, I'm Kevin O'Connor.
29:42I'm Roger Cook.
29:43I'm Tom Silver.
29:43And I'm Rich Trithui.
29:44For Ask This Old House.
29:46You are so bad.
29:47You are so bad.
29:59You