00:00In this FreeCAD tutorial, you learn how to model this shifted pattern on a cylinder.
00:08First create a new sketch in the part design workbench.
00:12Then select the bottom X-Y plane to sketch on.
00:16Select the circle from center tool
00:20and draw a circle with a diameter of 40mm on the origin.
00:25Draw another one with a diameter of 38mm also on the origin.
00:32Click on Close to exit the sketch.
00:36Select the Pad feature to extrude the sketch.
00:39Enter a length of 17mm and click on OK to apply.
00:44Now create another sketch.
00:48And select the X-Z plane to sketch on.
00:53Hide the latest feature, the Pad, by clicking the eye icon next to it.
00:57Then select the Centered Rectangle tool.
01:03Start on the vertical axis.
01:06Enter a width of 3mm and a height of 1mm.
01:13Select the Dimension tool.
01:17And click on a lower vertex.
01:19Enter a vertical distance of 1mm and press Enter.
01:24Click on Close to exit the sketch.
01:27Select the Pocket tool.
01:28Leave the mode on one-sided.
01:30And for Type, select Through All.
01:33Then click on OK to apply.
01:36Now create another sketch.
01:42And select the Y-Z plane to sketch on,
01:45which is perpendicular to the first rectangular cut.
01:48For that, hide the latest feature, the Pocket, to hide the model.
01:53Then select the Centered Rectangle tool again.
01:56Start on the vertical axis.
01:58Enter a width of 3mm and a height of 1mm.
02:04Select the Dimension tool.
02:07And click on a lower vertex.
02:10Enter a vertical distance of 3mm and press Enter.
02:14Click on Close to exit the sketch.
02:17Select the Pocket tool.
02:19Leave the mode on one-sided and select Through All for Type.
02:23Then click on OK to apply.
02:26Now two rectangular cuts have been made.
02:30To add rounded corners to the cuts,
02:32select all corners first.
02:35Hold the Ctrl key while selecting the edges.
02:40Make sure you have selected eight edges.
02:42Go to the Fillet tool.
02:46Enter a radius of 0.25mm
02:51and click on OK to apply.
02:55Now both rectangles have rounded corners.
03:05Go to the Multi-Transform tool.
03:10And make sure Transform tool shapes is selected.
03:15Otherwise, you cannot select the pockets and the Fillets you just created.
03:23Click on Add Features and select the first pocket.
03:28Click the button again and select the second pocket.
03:31Click on Add Features one more time and select the Fillet.
03:36Make sure the Fillet is selected last.
03:38Otherwise, some corners will not be rounded.
03:41Now right-click here and add a Polar pattern.
03:47For the axis, select the Z-axis, which is the vertical axis.
03:53Leave the other settings but change the number of occurrences to 30.
03:57To apply the pattern only, click on the OK button here, not the one on the top.
04:05Unchecking Recompute on Change is recommended because this is very heavy.
04:12Right-click here again, but now add a Linear Pattern.
04:19For the axis, select the Z-axis again.
04:25Change the Mode to Spacing
04:31and set the Spacing to 4 mm.
04:35Change the Number of Occurrences to 4
04:40and click on OK to apply both patterns.
04:46And the Shifted Pattern of Rounded Rectangles is complete now.
04:52Keep watching!
04:54You may want to see more.
04:56Consider subscribing if you like my content.
04:59Thanks!
04:59You might also want to check out my 3D Printing Channel.
05:03See you there!
05:04And if you like music,
05:06you might also want to check out this channel.
05:08In this channel,
05:09let's get started!