00:00Hello friends, welcome to Solid Edge tutorial. In this tutorial we are going to learn how to
00:05create 3D model for Bewell Helical Gear. This video is only for practice purpose. So let's start
00:11new isometric part. This is the synchronous environment and we are going to learn in
00:18ordered mode. So right click on synchronous take last option as transition to ordered
00:24and now we are in ordered mode. So for this 3D model creation we will use revolve pattern and
00:32locked command. So click on revolve command select front plane front plane take a line start from origin
00:45first we will make 3Sketch and after that we will damage knit. So this is second. To convert from
00:58straight line to arc just press A and make one arc. Continue with straight line.
01:14Come back to origin. Now we will dimension it. Click on smart dimensions. And this line should
01:27be 163. This height should be 32 mm. Next one is 36. Next is
01:4338. 38. 39. And last is 45. This is 5 mm. This should be 32. This is 80.
02:13This should be 102. And last one is 112. So our sketch is fully defined because it is completely
02:30in black color. So we need to define here axis of revolution because we are in revolve command. So click
02:40on
02:41axis axis of revolution and define the axis of revolution. Close the sketch.
02:52Define the angle that is 360. Finish. Cancel. So we have this design body 1. Now we will create
03:10gear to profile here. For that select sketch and click on left plane. Make one circle with 100 mm diameter.
03:28And another circle with 170 mm diameter.
03:35I mention it 170 and 100. Take a line. Start from origin. Up to the bigger one circle. And make
03:51this line in construction mode. Construction.
03:57Now we need to create tooth profile here. For that take arc by 3 point. Start with bigger circle. And
04:12smaller circle. And define middle point. So dimension this arc. Smart dimension.
04:22Arc radius should be 65 mm. And distance at the outer circle is 6 mm. And distance at the smaller
04:38circle. Should be 15 mm. So this should be 15. Now we will make mirror of this
04:52arc. For that click on this arc. For that click on mirror. Select the arc. Click on mirror command. Select
05:05the entities. And define the axis. And click ok. So we have tooth profile here. And we need to trim
05:15this outer circle. So trim.
05:22And this inner circle as well. So we have this closed profile. Now we need to make pattern of this
05:32tooth. But in Solid Edge 2019. We don't have pattern in sketch. So what we will do.
05:42We will make pattern of this. We will make pattern of this. We will make pattern of this. We will
05:47make pattern of this.
05:47After using locked command. So close sketch. For now. And finish. Cancel. So we have this sketch number 7. Here.
06:00I will hide this design body. And show the plane. We have selected left. So I will show the.
06:11This left right plane. And take a parallel plane. And take a parallel plane. To this right plane. Click on
06:20parallel plane. And select the right plane. And select the right plane.
06:25And give distance. As 45 mm. And click ok. Again select right plane. And give distance as 90 mm. And
06:34click ok.
06:37So we have added. So we have added two parallel planes. To the right plane. And we need to project.
06:44This sketch 1. That means sketch 7. On this plane 6. And plane 7. So for now. I will hide
06:56this plane 7. And this right plane also.
07:01And take a sketch. Click on plane 6. Now we will use here. Project sketch. Project to sketch. Click on.
07:17Project to sketch. Click ok. Click the sketch number 7. And click ok. And close the sketch.
07:28And finish. So we have. Projected sketch.
07:34So we have. Projected sketch. On this plane number 6. Which is.
07:37Which is. Sketch number 8. So I will. Hide this sketch number 7. And. Click on this play.
07:44Sketch number 8. Edit profile. We need to make. This line. In construction mode. Or we can delete this.
07:57Sketch. Now.
07:59Now. We need to rotate. This sketch. With the helix angle. For that. Click on rotate command. Enter the steps.
08:08As a 15 degree. And.
08:11Select the. Sketch number 8. Define the origin point. And second point. Take to the left or right.
08:23So. I will take to the right. So. I will take to the right. Now.
08:27We have. Original sketch. As well as. Rotated sketch. So. We need to delete. This one. Original sketch.
08:38I have deleted. This original sketch. Also. We need to. Scale this. Sketch. So. Click on. Scale. Select the. Sketch.
08:51Define origin point.
08:52And. Scale value. And. Scale value as. 0.75. So. Its. Size will get. Reduce. Close the sketch. Finish.
09:06And. We have. Sketch.
09:11And. We have. Sketch. Number 8. Now. For the. Plane number 7. We need to. Repeat the. Same procedure.
09:21So. Hide this. Sketch number 8. And. Plane number 6. So. The. Plane number 7. And. Sketch number 7. And.
09:30Repeat.
09:30With the same procedure. Sketch. Select the. Plane.
09:37And. Click on. Project to sketch. Click ok. Select. All sketch. Click ok. And. Close the sketch.
09:49And. Finish. Cancel. So. Just. We need to. Rotate. And. Scale this. Sketch number 10. For.
10:01That. Hide this. Sketch number 7. And. Click on. Sketch number 10. Edit profile. And. Delete this.
10:12Inner lines. Click on. Rotate. Select. Total sketch. Define. Steps as. 30. And. Select the. Origin.
10:30Second point. And. Take to the. Left or. Right. So. We will. Have to. Take. Right.
10:39Read the. Original sketch. And. We need to. Scale this. So. Click on. Scale. Select the. Sketch. And. Define. Origin
10:54point. Enter the. Scale value as 0.5. Close the sketch. Finish. And.
11:06We have this. Sketch. And. We have this. Sketch. On. The. Left. Plane. So. All. The. Sketches.
11:14The. Sketches. Take. The. Left. Side. So. We have. On. The. Left. Side. Inclination. So. I. Will. Show. The. Design.
11:26Body. Now.
11:29We. Will. Use. Locked. Command. Here. So. Click on. Locked.
11:35Portrusion. Block. Portrusion. And. Select. The. Sketch. Number. One. Note. Point. One. Sketch. Number. Two. And. Sketch. Number. Three. And.
11:48Take. A. Preview.
11:51So. Finish. Cancel. We have. Tooth. Profile. Here. Now. We. Will. Make. Pattern. Of. This. Tooth. Profile. Select.
12:02Portrusion. One. Click. On. Pattern. And. Select. The. Plane. And. Define. The. Origin. Point.
12:19Select. The. Direction. Of. The. Pattern. So. We. Will. Enter. Here. Seven. Count. And. Enter. Close. The. Sketch.
12:33And. Finish. Cancel. I. Will. Hide. The. Sketch. So. We. Have. Here. We. Will. Helical. Gear. So. We. Will. Make.
12:46One. More. Helical. Gear. On. The. Shank. As. Well. For. That. Take. A. Sketch. Select. The. Planar. Face.
12:52Blast. The. Facilies. Make. One. Circle. With. The. Diameter. Of. 1.10. One. More. Circle. With. The. Diameter. Of. 80.
13:08Take. A. Dimensions.
13:13click on line start from origin to the bigger one circle construction make this line in
13:25construction mode we need to make here tooth profile for that arc by 3 point start from
13:34bigger circle smaller circle and middle point let's dimension it
13:46at the top we have 2 mm at the bottom we have 4 mm
13:59radius of this is 40 mm so we need to make mirror of the arc so click on mirror select
14:11the arc define
14:13the axis click ok frame frame the outer body and this inner circle as well close the sketch
14:27finish cancel so click on parallel plane and this planar face take a plane with 48 mm distance
14:41click ok now we can hide this design body one
14:48so repeat the same procedure or project sketch click sketch select plane
14:57click on the project to sketch ok check the sketch click ok and close the sketch finish cancel
15:11hide this sketch number 17 plane click on sketch number 18 edit profile
15:21delete the lines from inner side we need to rotate this sketch so click on rotate select the sketch
15:37define the states as 15 degree select the origin second point take to the left or right
15:47so we have taken to the right so we have taken to the right so we have taken to the
15:51right hit to delete this original one
15:57we have deleted close the sketch finish cancel
16:06for the design body
16:10for the sketch number 17 as well
16:15click on lock command click on lock command click on lock command select the point from sketch number 17
16:23sketch number 18 review
16:29cancel we have ellical tooth here we will make pattern of this as well just hide the sketches
16:39click on this click on pattern click on pattern click on pattern select the port region 18 click ok
16:47select the planar face for the pattern define the origin
16:53select the direction we will give count as 12 close the sketch
17:15click on lock command we have ellical gear on the shank as well
17:19click on lock command we have ellical gear on the shank as well
17:20click on lock command we have ellical gear on the shank as well
17:25click on lock command we have ellical gear on the shank as well
17:27click on lock command we have ellical gear on the shank as well
17:34click on lock command we have ellical gear on the shank as well
17:35click on lock command we have ellical gear on the shank as well
17:35click on lock command we have ellical gear on the shank as well
17:36click on lock command we have ellical gear on the shank as well
