00:08Hi, I'm Chloe with Refinery29, and today we'll be making a jeweled collar for all your fall
00:13basics. Let's get started. What you'll need is some felt, scissors, a plastic knife and
00:18bobby pin, something with a round edge, a sharpie and glue, velvet ribbon, and an assortment of
00:23jewels. For your first step, you'll want to take your CD about an inch and a half away from the
00:29edge of the felt, and then go to the top of the CD and about two inches, do a dot
00:34on either side,
00:35and then start drawing all the way around the bottom of the CD. Next, you'll want to draw about
00:42an inch line out on either side, then you'll want to draw a line all the way down to the
00:49bottom to
00:50create a bib shape. Now start cutting out, and you'll want two of these bib shape pieces, so I'm
00:57cutting two at the same time. Next, you'll want to glue the two back sides together,
01:03and you'll want to wait to glue the very end. So now I'm going to take my velvet piece, it's
01:10about
01:10half a yard, and stick the ends between the two pieces of felt, and then you'll want to glue
01:18the ribbon between the two pieces of felt, and cut the ribbon right at the center, and now you can
01:28begin embellishing the front. And I'm using these little circular flat beads, you can get any craft store.
01:39Now I'm going to take these square beads and do a sort of geometric pattern on the front, and I
01:45find
01:45it helpful to use a bobby pin to help put the smaller jewels on. Now just keep putting your jewels
01:51down until the whole front of the collar is covered. And then once you're happy with the design, you want
02:00to let it sit for about 24 hours and set, and then you're ready to wear.
