00:09Zoom to the Woodside View profile view in the drawing. This profile view is drawn along the
00:16road centreline alignment. We can project our structures and pipes onto this view,
00:22even though the alignment does not follow the network. Pipes and structures will be
00:27projected to the view based on the shortest distance to the alignment. From Prospector,
00:33select the Storm 2 network. On the Pipe Network Contextual ribbon tab, Network Tools panel,
00:41choose Draw Parts in Profile. Select any part of the profile view in the drawing. The pipes and
00:48structures are now added to the view. Notice that the pipes and structures on Sycamore Heights cannot
00:56be drawn in this view. We can alternatively create a new profile view that will follow
01:02the pipe network exactly. To do this, we need to create an alignment along our network.
01:09In Prospector, under Pipe Networks, right-click on Networks and then select Create Alignment
01:16from Network Parts. On the command line, it's asking for the first part. Select the first structure
01:24structure on the Storm 2 network as shown. Then pan the drawing to the end of the network
01:31and select the structure at the junction of Woodside View and McAllister Boulevard. Press Enter to end the
01:38selection. In the Create Alignment dialog, we'll set the site to None and accept the default name.
01:46Leave the default style and set the alignment label set to No Labels. Ensure that Create Profile and Profile
01:56View is selected and then click OK. In Create Profile from Surface, add the finished ground surface
02:03surface to create a new profile. Change the style of the profile to Proposed as shown.
02:12Then click Draw in Profile View. In the Create Profile View dialog, go to the Profile Display options.
02:22Change the label set for the finished ground profile to No Labels. Then go to the Pipe Pressure Network page.
02:31Here you can see it has automatically selected the network parts from our chosen run. You can add
02:37other parts to be drawn in the view if you wish. Now go to the Data Bands page. Change the
02:44band set to
02:45Pipe Data if it's not already selected. In this band set, there are two data bands, one at the bottom
02:51of
02:51the view and one at the top. With the location set to bottom of Profile View. Set the data source
02:58to the
02:59Storm 2 network. Now change the location to top of Profile View. This band will display structure names.
03:09Again, set the data source to Storm 2 as before.
03:14Finally, click Create Profile View. In the drawing, pick an insertion point for the view as shown.
03:22You can see it has drawn the entire network and the data bands display information about the pipes
03:29and structures on the network. Using the Control key on the keyboard, you can select a single structure
03:36name, band label, and drag it closer to the structure if you wish.
03:40See you next time.
