Skip to playerSkip to main content
Learn Autodesk Civil 3D Profile Styles, Profile Labels, and Profile View Styles in this step-by-step tutorial. This video explains how to create profile styles, customize profile labels, and modify profile view styles in Autodesk Civil 3D.

Whether you are a beginner or an experienced Civil 3D user, this tutorial will help you understand profile styling, profile labeling, and profile view customization for professional road design and infrastructure projects.

Topics Covered in This Tutorial:
1. How to Create Profile Styles in Civil 3D
2. How to Create Profile Labels in Civil 3D
3. How to Modify Profile View Styles in Civil 3D

Software: Autodesk Civil 3D

Subscribe to Autodesk 786 for more free Autodesk Civil 3D, BIM Modeling, Road Design, Pipe Network, Utility Design, and Infrastructure Engineering tutorials.

Like, Share & Subscribe to support free Autodesk learning!

#AutodeskCivil3D #Civil3DTutorial #ProfileStyles #ProfileLabels #ProfileViewStyles #Civil3D2026 #Autodesk #BIMModeling #RoadDesign #CivilEngineering #InfrastructureDesign #CADTraining #Autodesk786
Transcript
00:10Profile and then Profile Styles. When we create a new style, it's often quicker and easier
00:16to create a copy of an existing style that already has some of the settings you need
00:20and then edit it. Select the proposed style, right click and choose Copy. In your copy,
00:28rename it to Design Style. The naming of the style should convey to a user what the style
00:35can be used for. You can also give it a description. Rather than changing the style now, we'll first
00:42save it and apply it to a profile. Then when we edit it, we can apply changes to see the
00:48result in the drawing. Click OK to save the style and in the drawing, use the profile properties
00:55to apply the new design style to the design profile. Now go back to the settings, right
01:02click on the style and choose Edit. On the Design tab, there is a Curve Tessellation
01:08setting. It controls how the curves on a profile are approximated as tessellated lines in a 3D
01:15view. We'll leave this set to 1 foot. On the Markers tab, we can see a list of profile
01:22geometry positions against which we can assign a marker style to be displayed. We'll add
01:27the Alignment Geometry marker, which is just a circle, to the Begin Profile and End Profile
01:36geometry positions. At the bottom of the tab, there are settings for a direction arrow.
01:43Here you can set the arrow style and control what happens if the arrow is too large to fit
01:49on a segment. We'll change the size options for the arrow to make it annotative. Change
01:56the options to Use Drawing Scale and set the size to 0.3. It will now display at 0.3
02:02of
02:03an inch on the plotted drawing at all scales. To see the arrow, go to the Display tab and
02:10for the arrow component, turn on the light bulb and click Apply. On the Display tab, we have
02:15settings for different view directions, Model, Profile and Section. For Model view direction,
02:24the profile will be displayed as a line in 3D. We'll leave the default color and line style
02:30for this. For the Profile view direction, this will control what we see in a profile view.
02:36Each component of the profile is listed with settings that can be changed individually.
02:42We can control the visibility of each component using the light bulb. You can also set the
02:48layer for each component and then use the layer settings to also control the display. We can
02:55set the color, line type, line type scale and line weight. For lines, set the color to yellow.
03:07Click Apply to see the change. Set circular curve to blue. For symmetrical parabolas, set the color to red
03:18and for asymmetrical parabolas to magenta. This will enable us to identify the different geometry types
03:25visually. Click Apply. We can see on this profile, we only have lines and symmetrical parabolas. Hold the
03:34key down to select all four elements and then set the line type to continuous and the line weight to
03:410.3.
03:43I'll apply this to show you the line weights. Turn off the direction arrow as we don't need to see
03:50this.
03:51The line and curve extensions are the dashed lines that are drawn to the intersection point.
03:57Select them both and change the color to 253. We want them to be lighter shade. Set the line type
04:06to dash 2 and the line type scale to 1. The warning symbol and notification symbol control the display
04:15of warnings on the profile. We'll leave these turned on. On the section view direction there is only one
04:22component. If we created a cross section that cut through an alignment it will display a marker
04:28where it cuts through the profile. However, the settings in here are largely redundant as they're
04:33overridden by settings for the section view. Click OK to save the style. The red ground profile
04:41doesn't show very well on a dark screen. We'll edit the style to change the color.
04:46Select the surface profile, right click and choose edit profile style. In the display tab for profile
04:54view select the main geometry elements and change the color to 63 and change the line type to continuous.
05:05Now that we've set our styles we'll add some annotation in the form of profile labels.
05:10Right click and choose edit labels. In profile labels we can add labels of different types to our profile.
05:19We can label major and minor stations, horizontal geometry points, lines, grade breaks and crest and sag curves.
05:32We won't label the stations as these can be annotated on the profile view so we'll focus on the geometry.
05:39For grade breaks add the label style station over elevation. You can preview the label style here.
05:47This will label changes in adjacent tangent grades where there are no curves.
05:53For grade break labels you can change the staggering option.
05:58Set this to stagger both sides which will move the labels apart
06:01when they're in close proximity to another grade break label. For lines we'll use percent grade
06:08which will label the line with its gradient. For crest curves add the style crest and sag
06:16with the child style of crest only. Repeat for the sag curves using sag only.
06:25Click apply to see the labels. We can see that the curve labels are placed just above the profile.
06:33We'll adjust this to place them towards the top of the profile view.
06:37In the label settings there are columns for dim anchor options and dim anchor value.
06:44The dim anchor option controls the default position of the label
06:48and the value adjusts it above or below the anchor.
06:52For crest and sag curves set the dim anchor option to graph view top and the value to minus 1
07:00.5.
07:02Click apply to see the new label positions.
07:06We'll want to be consistent in our labeling so we'll create a label set for these
07:10so that we can apply the same labels to all of our design profiles.
07:16Call the new label set design labels.
07:20We might want different labels for drawing production so we could create a different label
07:25set for that and change the label sets whenever we need to.
07:30Let's apply our new styles to the sycamore heights profile.
07:36Set the style to design style.
07:39Then go to edit labels and import your new design labels label set.
07:46Now we'll add some general profile view labels that you can use to annotate anything in the profile view.
07:54Select the view and on the ribbon choose add view labels and then station elevation.
08:03Pick a point on the top of the ground slope as shown.
08:07You can select a station and an elevation separately using this label so you'll need to snap twice.
08:14Drag the label off to one side to place a leader.
08:19Now we'll add a different label.
08:22This time choose depth.
08:25We can use this label to annotate a difference in elevation.
08:30In the view pick two points on the ground slope as shown.
08:34We don't actually want to show the depth here but the grade.
08:39Although we only had one choice of label when we used the ribbon there are other styles we can use.
08:45Select the label, right click and choose label properties.
08:56Select the profile view, right click and go to edit profile view style.
09:03When you make individual edits click the apply button to see the changes on your profile view.
09:10Go to the graph tab.
09:13This tab controls the vertical scale of the profile view.
09:17It allows us to set an exaggerated vertical axis.
09:22The horizontal scale is set by the model space or viewport scale.
09:33You can also change the profile view direction if you wish.
09:43Go to the grid tab.
09:50Go to the profile view.
09:52Select clip vertical grid.
09:55This will trim the grid to the profiles in the view.
10:00Select clip to highest profile.
10:03Do the same for the horizontal grid.
10:08The grid padding is a margin that can be added around the extents of the profiles in the view.
10:15Select omit grid in padding areas for both the horizontal and vertical grids.
10:22Change the grid padding dimensions on the left and right to 0.5.
10:27The units are in major grid blocks.
10:31The axis offset allows you to offset the position of the axes in plotting units beyond the grid and padding
10:38areas.
10:40Go to the title annotation tab.
10:45Here you can change the content and style of the view title and set its position relative to the view.
10:52We want to make the title text large, so change the text height for the title to 0.5.
11:00For the title content, click the edit text button.
11:04We want our title text to be all in uppercase.
11:09Select the parent alignment property in the editor and in the properties change the capitalization to uppercase.
11:17Then use the arrow button to apply it back to the text contents.
11:21Click OK.
11:24To see how the position of the title changes,
11:27change the title position location to bottom and click apply.
11:32Then change the location back to top.
11:35You can adjust its position by adding an X and Y offset.
11:41Remove the border around the title.
11:45Under the axis title text, you can select any of the axes.
11:50Left, Right, Bottom, Top.
11:55And edit the axis title text contents and position for each axis.
12:01Our top axis is set to read Station and the left axis is set to read Elevation.
12:09Go to the Horizontal Axes tab.
12:13Here we have more detailed control of the axes.
12:16We can display major and minor ticks and labels.
12:22The sizes of the ticks and the labels can be changed.
12:26The format and contents of the text can be edited,
12:30and the labels can be adjusted relative to the axes.
12:35The major and minor intervals can be set here.
12:40Minor labels can be set to a subdivision of the major grid.
12:45At the top of the dialog, you can set which axis to edit, top or bottom.
12:50The axis is set to bottom.
12:51With the axis set to bottom, change the major tick interval to 200.
12:57The bottom axis interval controls the major and minor grid spacing,
13:01as well as the axis annotation interval.
13:05Set it back to 100.
13:08We'll leave the default settings for this.
13:12Go to the Vertical Axes tab.
13:15Here you have the same options for editing ticks and labels as the horizontal axes.
13:21You can switch between axes here and edit the settings for each.
13:27The left axis interval controls the major and minor grid intervals.
13:32Try changing the major interval on the left axis to 20 feet temporarily.
13:43On the Display tab, you'll see a list of all the components that make up the profile view.
13:51Like other styles we've looked at, you can change the visibility,
13:54layer, color, and line type settings in here for each component.
14:01We're going to make some adjustments in here by changing the visibility settings
14:05to remove some of the components from our profile view.
14:10We don't want any annotation on the right of the view,
14:14so turn off Right Axis Annotation Major and the ticks Right Axis Ticks Major
14:21and Right Axis Ticks Minor and apply the changes.
14:26Similarly, we want a clean top axis,
14:30so turn off Top Axis Title, Annotation Major, Ticks Major and Ticks Minor.
14:40We want to mark the profile view with the positions of the tangents and curves on the alignment,
14:45so that we can see where they relate to the vertical road geometry.
14:50Turn on Grids at Horizontal Geometry Point.
14:54This will place blue lines where the horizontal geometry changes.
15:00Finally, we can see that the Profile Hatch component is visible.
15:04We'll add some hatching to the view shortly.
15:07Click OK to save the changes and review the profile view.
15:12Select the view, right click and choose Profile View Properties.
15:16Go to the Hatch tab.
15:20In here, we can create hatched areas between two profiles,
15:24usually the existing ground and our design.
15:28The hatching will denote the cut and fill between the two.
15:33Add a cut area and a fill area.
15:37Civil 3D will automatically arrange the order of the surface profile and the design profile for each,
15:43so that we can apply different hatch styles for cut and for fill.
15:47You can change the hatch styles under the Shape Style column.
15:53Click OK to save the settings and apply the hatching.
15:58The hatching allows us to easily identify the relative areas of cut and fill,
16:03and can be useful in appraising the design levels of our road.
16:08We now have a clear and clear

Recommended