Skip to playerSkip to main content
Learn how to create cross sections for rail assemblies using Autodesk Civil 3D and Dynamo. In this tutorial, you will explore railway cross-section creation, rail assembly modeling, Dynamo automation, and BIM workflows for transportation infrastructure projects.

This video is part of the Autodesk Civil 3D Transportation Infrastructure – Rail Design series, covering railway design and Dynamo automation step by step.

- Create Cross Sections for Rail Assemblies
- Railway Assembly Cross-Section Design
- Civil 3D Dynamo Workflow
- Rail Corridor Cross Sections
- Railway BIM Modeling
- Transportation Infrastructure Design

#Dynamo #AutodeskDynamo #DynamoForCivil3D #DynamoBIM #BIM #BIMModeling #BIMModel #BIMDesign #BIMWorkflow #BIMAutomation #BIMCoordination #BIMTechnology #BIMInfrastructure #Civil3DBIM #BIMEngineering #DigitalConstruction #ParametricDesign #VisualProgramming #Autodesk #AutodeskCivil3D #Autodesk786

Category

📚
Learning
Transcript
00:09We'll create cross sections, then use those sections to evaluate material quantities.
00:15We'll also create plan and profile sheets and add labels to our rail alignments.
00:20To create cross sections in Civil 3D, we have to create sample lines first.
00:24So we'll pick the alignment that we want those lines based on, and in our case it's the centerline alignment,
00:31and we can determine the data sources included in the sections.
00:36We can either create individual pattern lines or create several lines based on a station range,
00:41and that's what we'll do in this case.
00:43We can determine the beginning and end stations, and the size and the spacing of our lines.
00:50Then once we select OK, we'll see the pattern lines appear.
00:54And now we can create sections by selecting the section view in the home ribbon,
00:59and we will create multiple views.
01:02And this will be based on the lines that we just created.
01:05In the view styles, we can set up the appearance of the cross sections,
01:09things like vertical exaggeration, we'll keep that at 1, and the grid layout.
01:15We don't want to clip our grid in either direction.
01:18We'll also minimize the spacing above and below the sections.
01:22And we can control the labels and grid patterns,
01:25and we want to control the display of most of the section elements.
01:31We can also edit this information later if we need to.
01:34And we can determine the layout and choose from the out-of-the-box settings,
01:38or we can include our own custom settings if we have them.
01:43So we'll choose 500 scale, and we'll stay with many of the default settings.
01:47We can edit the display styles for our corridor and our existing ground,
01:52and we'll make the existing topo green.
01:57And we will shut off the band display.
01:59We don't need that in section view.
02:01And we can pick the location in plan view where we want our sections to be drawn.
02:07And as we inspect the sections, we're looking for any issues that need attention.
02:12So the sections are dynamic.
02:14So if we revise our corridor, the sections will update automatically.
02:19When we select any section, and then right-click on the section,
02:23we can edit the display styles.
02:24So here we'll adjust the minor ticks and our grid lines.
02:30And we'll go to the display and turn those lines on.
02:33And now it looks like we're set.
02:35If we need to adjust the spacing, we can pick the border, then right-click,
02:40and edit the group plot style.
02:42And in this area, we can adjust the spacing of our sections and the print area.
02:47Once our sections are set up and ready, we can create the section sheets.
02:51So under the output tab, we can pick create section sheets.
02:57So we'll use the alignment, the pattern lines, and the sections that we just made as our basis.
03:02When we select OK, it will ask us to save the drawing.
03:06So we'll pick OK to continue.
03:08Now we will see the sheet set manager dialog come up.
03:12Here we can name our sections.
03:14We can give them a description and pick a template.
03:18We will use civil metric.
03:21This gives us control to populate the data for our border sheets and for our sheet information.
03:27Once we pick OK, we will see the sections that we just made in the sheet list.
03:33And we can inspect those sheets and the sections to make sure everything displays correctly.
03:39We can also double-click on the sheet information to update and populate the fields.
03:46If we ever need to adjust the scale of our sections, we can pick the viewport window, then choose the
03:53updated scale from the arrow down and reposition the view window.
04:00Now let's get into the volume calculations.
04:02We need to create two surfaces, one based on the top of our finished grade and the other based on
04:08the bottom of our section.
04:10So let's pick our corridor and select corridor surfaces.
04:15In this window, we need to pick a new surface and we'll call that top finished.
04:21In the overhang correction column, we will pick top links for this surface.
04:27Then we will add all our different elements from our corridor.
04:31Now we'll set the ballast and the wall as break lines.
04:36And now we need to set the boundary.
04:38So under the boundary tab, we will right-click on our surface and select corridor extents as outer boundary.
04:44And this will eliminate any unnecessary triangulation around the edges.
04:49We'll do the same thing for the lower surface.
04:51Here we'll pick bottom links.
04:54We'll add the codes that we need.
04:57We'll add the boundary to the surface.
05:00And we'll build the surfaces.
05:02Now in plan view, we can inspect the results based on our contours.
05:08But to really evaluate this, we need to see these in section view.
05:11So to add these surfaces, we will select any section and then pick sample more sources.
05:18And here we can add the surfaces we just created and define the view styles.
05:23So the finished surface will be finished grade.
05:26And let's create a new style for the lower surface so that it stands out.
05:30So we'll copy the current style.
05:32We'll rename this bottom topo.
05:35We'll make this one red.
05:37Then we hit apply and we can inspect the results.
05:40So we can select the new surface and we can see how they look.
05:44In this section, it looks okay.
05:45But if there are any sections that are incorrect, we can redefine those codes and regenerate those surfaces.
05:51Now we'll compute the volumes.
05:53So let's pick a section and select compute materials.
05:57So we can define the criteria.
05:59And let's pick cut and fill.
06:02For this existing ground, we'll choose our existing surface.
06:06And for the datum, we'll pick the lower surface.
06:09When we select okay, we should see our cut and fill shapes in section view.
06:15If we want to add the materials like ballast or subgrade, we can pick the section and go back to
06:21compute materials.
06:23And we can either add these materials to our list or choose import another criteria to create a new list.
06:29So we'll just add these new materials here.
06:31And here we want to define these as structures.
06:34And we'll pick the shape.
06:35And in this case, we'll pick ballast as the style.
06:39And we'll define the data type from the corridor shape.
06:43And so we'll pick our ballast.
06:46And we can do this for any of the other materials that we need to quantify.
06:51And in the section view, we can see the shading for these different materials.
06:57Once the areas have been defined, we can pick the section again and choose generate volume report.
07:03For this, we can keep the default cut fill style and generate the report.
07:08And this will provide details of each section with a cumulative value.
07:12We can copy this information or save it in another format if we need to.
07:16We can run the same report, but this time we'll change the style to select materials.
07:22And this will give us a breakdown of each element by section.
07:27We can also create a material volume table.
07:30Another way that we can create earthwork volumes is under the analysis tab under the volumes dashboard.
07:37Here we'll select a new surface.
07:39We can identify the base surface, in this case our existing ground,
07:42and the comparison surface, or the bottom of our corridor.
07:47Once we select OK, it will provide a summary in this window.
07:51The last thing for volumes, we want to display the areas by station.
07:56So we'll pick a section and we'll choose view group properties.
08:00If we pick the change volume tables ellipses,
08:04then we can set a table of quantities that will display the section view.
08:09We'll create a new style. We'll call that calculate cut fill.
08:14We'll set that text size and the display styles.
08:18Let's turn off the fill and set the color for the text and for the borderlines.
08:26And we'll pick our materials.
08:28For now, we'll just use the cut and fill materials.
08:31Then we can set the position of our table and then say OK.
08:34And the material table will display near our section.
08:37Now if we need to see the other materials, we could use the other criteria material list
08:43and show the other structure elements.
08:46One final note on sections.
08:48The pattern lines are dynamic, so if we change the length or the angle using the grips,
08:54the sections will automatically update with them.
08:59Now let's set up the plan sheets.
09:02We'll go to the output tab and pick create view frames.
09:06Let's make these based on our eastbound track.
09:09We can choose from different scales.
09:11We'll stay with 500 scale for now.
09:13And we will stay with the default orientation.
09:16And we can set the layer and style for the view frames and the match lines in this dialog.
09:22So let's add a profile band in this step for the rail cant.
09:29And here we can set up our display in the compose label dialog.
09:34And now let's set the applied cant with the left and right label.
09:41And once that's good, we can create the view frames.
09:45And in model space, we can get a feel for the layout.
09:48If needed, we can adjust match line labels.
09:51And we can do that using the grips.
09:54Now let's pick create sheets.
09:57Here we can control the setup in the layout.
10:00And we'll make these sheets part of the CAD file.
10:04We'll give that a name.
10:06And we can set where the content is stored.
10:09And this will be in our ACC project directory.
10:12In the profile display options, we can control the label styles.
10:20And in the data bands, we can set the elevation based on our surface profile.
10:26All the other items will stay with the default settings.
10:29We'll pick OK.
10:31And then we'll need to save the drawing.
10:34Then we can pick where we want the profiles to display.
10:37And the sheets will start to generate.
10:39Then we'll see the sheet set manager come up again.
10:42And we'll set those key items that we want, similar to our previous step.
10:46And we can view the results both in model space and in paper space with the sheets.
10:55If any of the profiles did not display the way that we need, we can select the profile to modify
11:00the labels or the layout.
11:03And here we'll add the labels for the slope and for the crest and sag curves.
11:08Finally, let's add some labels and some line work to the plan sheets.
11:13So under the annotate tab, we'll go to add labels.
11:16Now there are a lot of annotation styles that we can choose from.
11:20But here we just want to add elements to our alignment.
11:24So we'll pick alignment as our feature and select multiple segments as our label type.
11:29And with this setup, we can determine our tangents with the bearing and distance.
11:34Our curves that will include the delta and the spirals.
11:39And for any of these segments, we can revise the styles.
11:42So we'll pick that for the spirals.
11:45And we will shorten the label to LS.
11:49And we don't need any of the spiral PI stations here.
11:52And so we can remove that element.
11:56And once the labels are placed, we can slide them along the alignment or reposition them using the grips.
12:03We need to create labels for the eastbound track.
12:06But we want to change the layout for the spiral just slightly.
12:09So let's create a new style based on our previous style.
12:13And we'll move the attachment point.
12:16And we'll set that offset to work with the eastbound line.
12:22And again, we can make revisions as needed and clean up any sort of conflicts.
12:29Now let's pick the corridor and choose feature lines from corridor.
12:34In the command line, we will pick all.
12:37Here we can choose from the features that are displayed within our corridor.
12:41And we can choose how we want those to display.
12:44And we can set the style and the layer.
12:47And if we turn our corridor off now, we can see those lines show up in our plan view.
12:53And this helps us to add some essential elements based on our design model to the plan sheets.
12:59So these controls and tools allow us to create a complete design pack.
13:05Back.
13:05On time, left.

Recommended