00:00To reset the red light blinking waste ink pad counter error on an Epson L3-10110 printer,
00:05you must use a dedicated adjustment program on a Windows computer.
00:09Preparation Steps
00:10Temporarily turn off your computer's antivirus and disconnect from the internet,
00:14as reset utilities are often flagged falsely by security software.
00:18Connect your Epson L3-10110 to the computer using a stable USB cable and turn the printer on.
00:24Download the compatible Epson L3-10110 resetter adjustment program zip folder
00:29and extract its contents.
00:30Step-by-step reset procedure
00:32Open the extracted folder and run adprog.xa or the designated adjustment executable as an administrator.
00:39Click on the select button located near the top left of the program window.
00:43Under model name choose L3-10110 or select your specific USB port connection from the drop down menu,
00:49then click OK.
00:50Click on the particular adjustment mode button to open the maintenance menu.
00:54Scroll down the list, select waste ink pad counter and click OK.
01:00Check the box next to main pad counter and any other sub pads listed.
01:03Click the check button to read the current point value and confirm it has reached 100% capacity.
01:07Visit select the target checkboxes again to re-highlight the counter fields,
01:11then click the initialization button.
01:14Click OK or accept on the confirmation pop-up window that appears to clear the counter memory.
01:18Turn off your Epson L3-10110 printer using the physical power button when the tool prompts you to do so.
01:23Turn the printer back on.
01:25The red blinking lights should now be cleared and your printer is ready for regular use.
01:28Simply click on select, click on the main pound counter.
01:31Just click on the two checkboxes here and then click on initialize.
01:35Device doctor.
01:37Skip to previous prompt.
01:39Then that's the full picture.
01:40If this saved you a search, hit like and subscribe.
01:43One clearance every day.
01:45See you in the next one.
